mouseover to enlarge
30mm Protexit™ Exit Block 30mm Protexit™ Exit Block
click thumbnail to select

30mm Protexit™ Exit Block

Part No. 1200
£84.63(including VAT)  In Stock
Sheave Ø (mm)30 mm
Maximum line Ø (mm)8 mm
Maximum working load (kg)250 kg

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

Sheave Ø (mm)30 mm
Length (mm)75 mm
Weight (g)37 g
Maximum line Ø (mm)8 mm
Fasteners (mm)5 FH mm
Fastener spacing (mm)57 mm
A (mm)18.2 mm
B (mm)45.7 mm
Maximum working load (kg)250 kg
Breaking load (kg)500 kg
Drawing - DWG: (open/save)
3D drawing - IGS: (open/save)
Photo - EPS: (open/save)
Photo - JPG:  1200.jpg (open/save)
  • United States
  • Australia
  • France
  • Italia
  • New Zealand
  • Polska
  • Sverige
  • UK